Rechargeable batteries may run for a long time but they do have a limited lifespan. iPhone batteries, for example, are good for roughly 400 charge cycles. Performance starts to degrade afterwards and owners will need an iPhone battery replacement in order to continue using the device when hopes of extending the iPhone battery life has been lost.
Sometimes a replacement is required much earlier, such as when the unit routinely fails to charge or runs out of power very quickly and such cases may require a iPhone battery replacement kit. Owners can also have their phones processed at Apple service centers. They could also opt to replace it themselves as spare batteries are available online at reasonable prices. The guide below offers simple instructions for DIY iPhone battery replacement.
Step-by-Step Guide to iPhone Battery Replacement
- Close all the apps and turn off the phone with a prolonged press of the power button. Swipe the red slider on the screen as instructed to complete the process. Wait for a few seconds before proceeding to the next step.
- Look down at the bottom of the device. For the iPhone 4 and 4S, there should be a tiny screw at both ends of the port. Use suitable screwdrivers to loosen them then keep them somewhere safe for easy retrieval later on.
- In order to lift the back plate, try to put some pressure on it and slide it down just a little bit until it gives way. Apply more downward pressure and increase surface contact if it proves hard to budge.
- The iPhone 4 battery is immediately visible when facing the back of the phone. It is held in place by a lone screw while the 4S uses a more secure dual arrangement. These will have to be taken out in order to get to the battery itself.
- Slowly lift up the connector at the lower left-hand corner of the battery with any slender tool that would fit in the tight space. Be sure not to scratch the areas surrounding it.
- Take the battery out by lifting the plastic tab attached to its side. This may prove challenging and require a good amount of force, but do it gradually so as not to upset nearby components.
- The new battery is ready to be inserted. Align the contacts and secure it with the screw that was removed earlier. Insert the back plate and tighten the screws at the bottom. Power up the phone and enjoy.
Things to Consider Regarding iPhone Battery Replacement
- When buying a new battery, be sure to get one for the right iPhone model. Those on the market all have slightly different shapes and connector placements so find a piece that fits.
- Having the right kind of tools is also important when trying to open the case. Household screwdrivers or a specifically tailored iPhone repair tool kit.
- The components are extremely small and packed densely so a good steady hand is ideal. Apply even pressure and never force anything on the device.
iPhone battery replacement is a fairly uncomplicated task that owners may attempt when the situation calls for it. On the other hand, those who are uncomfortable about opening their phones or are unsure whether the battery is truly at fault can send their units to a repair shop such as iFixYouri for proper diagnosis and parts replacement.