Tag Archives: iphone 3g screen replacement

How to Recover Data From a Damaged iPhone

You have finally bought an iPhone and you are enjoying every moment of it but unfortunately, the screen gets cracked or broken and you are confused because you do not know how to change a cracked iPhone screen. Some people might even decide to shop for a new iPhone since the broken one no longer seems attractive as it was before. When you find yourself in such a situation, you need the right tips and ideas of how to change an iPhone screen to save the hassle and expense of a new phone.

Tools Required – How to Change a Cracked iPhone Screen

Before you even start the process of changing the iPhone screen, ensure that you have the right tools, most of which can be found online. This helps you get the exact size that you need instead of shopping online where you are not very sure about the dimensions. If you prefer shopping online, ensure that you have the right dimensions that will be compatible with your device. Here is a list of the basic tools that you should have:

Replacement glass
Philips screwdriver
A wedging and scraping device or a razor blade
Superglue or double-sized tape
A pair of scissors
Q-tips and Rubbing alcohol
Heat gun or hair dryer

Step 1: Unscrewing The iPhone With a Cracked Screen

Check the bottom part of your iPhone and take keen interest on the side that has the Home button. You will notice two screws fitted on both sides of the USB port. Unscrew them using the Philips screwdriver. Also remember that it will not be necessary to remove the SIM card for you to open the device.

Step 2: Removing The Cracked iPhone Screen

The screen can be removed using two major methods. You can either use a scraping or wedging tool. A razor blade is mostly preferred because it can be fitted between the metal and the rubber to lift the screen. Alternatively, you can use a suction cup by placing it above the Home button then pulling it up gently. You will notice that the glass has been removed without damaging the rubber gasket that surrounds it.

Step 3: Separating The Screen From The iPhone

Check for the flaps that hold the phone and the screen together at the top right corner. They are normally labeled 1 and 2 attached to orange stickers. You will also notice the 3rd sticker placed under the 2nd flap. It should be released by lifting the black clamp. At this point, you will notice that the screen has been completely separated from the iPhone.

Step 4: Detaching The Screws

The interior of the device has 5 screws along the side rails, 3 along the flaps and 2 on the opposite sides. These screws are of the same size and that means you should not worry about where to place them after completing the installation process. You will also notice a black tape over each screw and you can cut it off using a razor blade. The black tape is less important in this case.

Step 5: Separating The LCD From The Glass

Detach the LCD screen from the glass by putting the wedge between the rails then wedge the inner section out. For you to clear the top flanges, make sure the LCD drops down near the Home button. Use some little force if possible because the metal cannot get distorted that easily.

Step 6: Scrubbing The Adhesive

Use a wedging device or razor blade to scrape the glass leftovers or any other pieces along the metal frame. It is also possible to use a hair dryer or heat gun but this should be done carefully to avoid distorting the frame. The bonding agent may not dissolve by rubbing alcohol so you can try scrubbing using a Q-tip then removing it with a razor blade.

Step 7: Installing The New Screen

When installing the new screen, make sure the super glue does not cross to the Home button. You may also decide to use a double-sided tape but ensure it is trimmed properly. Adhesive should be applied along the black plastic at the top or bottom sides while excluding the middle part. Use the tweezers to control the double-sided tape so that you do not let your fingers touch it thus weakening its ability to stick. Also ensure that you take away the protective plastic found on the new glass where it is expected to touch the tape.

Step 8: Installing The LCD

Install the LCD glass and make sure it fits properly by sliding it from the bottom part of the device. Fix the screws back where they belong and also restore the 3rd cable into the clamp. Press the 1st and 2nd cable onto the connector by using a little pressure. Do not worry if you miss the connector several times because this is quite common.

Step 9: Assembling The iPhone

Restore the screen back to the iPhone by inserting the top part first. The sides should be attached to the connectors and also make sure the bottom fits in properly. When the LCD and screen are well-fitted, fix the remaining 2 screws back into their places found on both sides of the USB port.

DIY vs. Professional Repair

These are the most crucial tips on how to change an iPhone screen; however, as you can see, it is a long and rather confusing process. That is where we at iFixYouri come in handy. We can replace your cracked iPhone screen properly and inexpensively.

DIY Fix, Repair Parts

iPhone 3G Screen Glass Breakdown

July 12, 2010 Staff 1 Comment

The iPhone 3G screen is made of glass and protection is typically a good start when using the product. It is optical quality glass, which sits under the frame to offer it some protection but if dropped on a hard surface such as concrete, it could easily shatter or crack. Because of the vulnerable screen an iPhone 3G repair is one of our most popular repair services.

When you feel the glass it seems pretty hard. Overall the 3G glass screen is hard but still susceptible to scratching from every day wear and tear. An old myth that existed when the iPhone 3G was released was that the new glass would not scratch anymore, compared to it’s plastic counterpart. While it may not scratch as easily, don’t expect perfection. Think of it this way: the windshield on your car is made from glass that is very strong and durable. If you own the car a few years though, you may notice the windshield wipers causing tiny scratches. If somebody throws a brick at the glass windshield it will likely break. The iPhone 3G is the same way but it does not take a brick, just a fall out of your lap when you are getting out of the car can be enough to shatter the screen.

Invisible Screen protectors and plastic covers can help with both with both scratching and shattering of glass. As many of our in-house tests have proved though, they may not protect everything behind the screen, such as the LCD digitizer display. Th screen may often freeze (whit freeze) which can be a result of LCD damage.

The multi-touch touchscreen for the iPhone 3G was still new and exciting when it was released clear back in July 2008. The back is made of plastic, which is different than the aluminum back of the original iPhone and the glass back of the iPhone 4.

The biggest different between the iPhone 3G screen and other models (besides the 3Gs) is the fact that the glass is not glued to the LCD display. This is great if the glass breaks, because a DIY repair can be accomplished for about $30. If the LCD goes out too, the replacement LCD parts for a DIY repair can be expensive. The difficulty changes too as a screen repair can be simple (relative to your experience) if you know what you are doing. The problem with the 3G screen being separated from the LCD is that dirt and dust can get in front of the display and behind the glass.

Some people don’t like the 3G glass because it can give off a yellowish tent and be hard to see when not looking at it at the right angle. Some iPhone 3G users have complained that the numbers and letters can seem blurred out with some phones. Others say it’s a grayish dull affect that makes the over experience less enjoyable and productive.

Overall, at the time of the release the iPhone 3G was awesome and the screen, even with some of the complaints, was an advancement over past models. If you are experiencing any of the issues discussed above and an iPhone repair or free diagnostics is needed, do not hesitate to call for help.

DIY Fix, Repair Parts

iPhone screen replacement – What is the easiest way to get it done?

July 5, 2010 Staff 2 Comments

The iPhone screen, when working, is a thing of beauty. When compared to other phones, the iPhone’s touch response, feel and clarity stands far above the competition. Many people are sorely disappointed when the find that with the upsides, come the downsides. One slight drop though and you’re left with a crack the hurts you every time you pick up the phone to use it.

Here’s our suggestion for a quick fix:

1) Select the iPhone glass repair you need. We’re here to help you the entire process for:

iPhone 3G Repair

iPhone 3Gs Repair

iPhone 4 Repair

2) Purchase, check-out, and ship your iPhone to:

iFixYouri

748 Park Ave

Suite D

Lake Park, FL 33403

3) We’ll receive it, and ship it back to you within 24 Hours! If we get your iPhone in by 1Pm, we’ll fix it and ship it back the same day.

Our iPhone screens are all high quality parts, which will insure that your iPhone will function with the same factory feel, as if it was brand new!

We try to make this as painless as possible. Based on your shipping option that you select, your phone can be out of your hands for less than 36 hours!

One of the most bizarre unfortunate breaks was an incident where a customer left his new iPhone 4 in the car during a hot day in Florida, and the phone got so hot, that the back glass shattered. Fortunately for him, this was a relatively cheap repair that caused him more headache than anything.

If you’re more of the DIY type, your best route is to purchase the iPhone parts needed, and we’ll ship them out the same day, as long as you place your order by 3:30pm.

Have a question regarding iPhone repair? No problem. Drop us a line at 561-881-0095, or toll free 888-494-iFix, shoot us an email at [email protected], or catch us on our live chat!

We’re here to make this as painless as possible, and get your repair done right, the first time, and quickly.

From water damage repair to cracked glass, we’ve got you covered.

iFixYouri Blog